Top 10 Best Budget Plasma Cutter should buy for 2022

Top 10 Best Budget Plasma Cutter should buy for 2022

If you have a low balance, you can still check out the Best Budget Plasma Cutter carefully selected by us

This is the Best Budget Plasma Cutter that we have curated from the experience of our entire community , please check it out

Editor Choice: 10 Best Budget Plasma Cutter 2022

The Best Budget Plasma Cutter to buy in 2022

YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

$379.99  in stock
2 new from $379.99
Free shipping
Amazon.com
as of April 22, 2022 5:31 am

Features

  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • Built-in Post Flow:When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
  • Powerful Cutting Ability:10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V,60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Lightweight and Portable:Allows for connection to 110- or 220-volt receptacles without tools,Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
  • Added Safety:Certificated by ETL,Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control

Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine, ½ Inch Clean Cut, Brown

$429.00
$389.00
 in stock
2 new from $389.00
Free shipping
Amazon.com
as of April 22, 2022 5:31 am

Features

  • ★ PLASMA CUTTER--50AMP Plasma Cutter Current Output; Max Ideal Cut Thickness: 1/2" ; Max Severance Thickness: 3/4"; Compact Plasma Cutter Has a Handle for Portability and Uses Non-Hazardous Compressed Air to Cut Stainless Steel, Alloy Steel, Mild steel, Copper, and Aluminum;
  • ★ TIG WELDER: 15-200AMP DC TIG Electric Current Output; Quality TIG welding on Stainless or Steel and Precise Welding of Thinner-gauge Materials; HF arc start hand torch control and Precise Foot Pedal Welding Heat Control(Foot Pedal NOT Included). ★ STICK/MMA WELDER--15-200AMP DC Stick/MMA Electric Current Output; Easy ARC Start, Stable Welding Arc; Deep Weld Pool and Beautiful Welding Shape; Adjustable Hot Striking Arc Current which Can Greatly Improve the Arc-Starting Function; Suitable for We
  • ★ SETUP WITHIN 1 MIN--The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min.
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color CT520D Plasma Cutter are "LCS22" or "LCS33". Please search "Loots LCS22" or "Loots LCS33"; ★ NOT compatible with Loots LCON20, LCON40 or LCON90 Consumables Sets or any other third part consumables set
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

Mellcom CUT50 Welding Machine, 50 Amp Plasma Cutter 110/ 220V Dual Voltage 1/2 Inch Clean Cut Portable with LCD Display Cutting Machine

$119.99  in stock
2 new from $119.99
Free shipping
Amazon.com
as of April 22, 2022 5:31 am

Features

  • PLASMA CUTTER: Under 25 Amps DC output current, 60PSI, it can ensure an ideal clean cut of 8mm, a maximum cutting thickness of 12mm, and maintain efficiency above 85%. This machine comes with PT-31 torch, which is very suitable for cutting and piercing thin metals.
  • MULTI APPLICATIONS: MELLCOM plasma cutter is specially designed for cutting stainless steel, alloy steel, low carbon steel, copper and aluminum and other metal materials. It can effectively cut rough, painted and rusty surfaces, and generates the least slag. It provides better cutting quality while ensuring a longer life of wearing parts.
  • PORTABLE & USABLE TOOL: This welding & cutting equipment is small, compact in structure, and has excellent current output performance. Lightweight 15 lbs. Easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project.
  • WHAT YOU GET: We have equipped this electric welding machine with more excellent product accessories-1 x AFR-2000, 1 x PT-31 Cutter Torch, 1 x Earth Clamp, 2 x Brass Fittings, 1 x PTFE Sealing Tapes, 4 x Hose Clamp, 2 x Nozzle, 2 x Electrode, 4 x Ceramic Ring, 2 x Ceramic Cup, 1 x English manual.
  • QUALITY ASSURANCE: We will provide quality assurance for every product. In the event of product damage or missing parts, please feel free to contact us and we will solve it for you within 24 hours.

50Amp Non-Touch Pilot Air Plasma Cutter 110V / 220V Dual Voltage Inverter DC Digital Display IGBT Portable Cutting Machine

$199.99  in stock
2 new from $199.99
Free shipping
Amazon.com
as of April 22, 2022 5:31 am

Features

  • ️ Non-Touch Pilot Arc Plasma Cutter★: Pilot Arc Technology Allows You To Cut Without Touching The Tip To The Metal.Efficiently Cuts Though Rough, Painted, And Rusty Surfaces. Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper, And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
  • ️50 Amp OUTPUT ★: Up To 50A Output Current Can Cut Up To 31/64 Inch (13.0mm) Plate. Equipped With Digital Display And Alarm LED, Read The Output Welding Current.
  • ️ PACKAGE INCLUDES★: Power Supply, Plasma Cutting Torch, Ground Clamp,Converter Power Cord, Pre-installed NPT 1/4” Industry Type D Plug And Air Filter Regulator, Consumables, Instruction Manual, Etc.(As Picture)( Stainless Steel,Gas Tube, Hoop,Plasma Tips Nozzle Extended, Electrode- Extended,Shroud Ceramic Cup ,Gas Ring)
  • ️Plasma Cutter Can Be Plugged Into 120V / 230V Dual Voltage Using(Automatic Fitting).

Plasma Cutter 50A, CUT50 110/220V Dual Voltage Plasma Cutting Machine 12mm Clean Cutting Thickness (Green)

$189.99  in stock
Amazon.com
as of April 22, 2022 5:31 am

Features

  • 【50Amps plasma cutter】: CUT50 is 110/220V auto dual voltage plasma cutting machine, It is inverter technology 50/60Hz high frequency arc starting, 14mm max cutting thickness, quality cutting thickness is 10mm at 220V. The plasma cutting machine is high frequency need to touch metal get arc starting. We suggest pilot arc function (Model:CUT50P) If you like do not touch metal to get arc starting.
  • 【Dual Voltage 110/220V】: The cutting machine is designed dual voltage 110/220V, auto indicate 110 or 220v, handle swift is not required at machine. There are two voltage lights at front of panel, LED 110V lighting when connect machine to 110V, LED 220V will lighting up when connect machine to power 220V, Therefore the user easy read voltages of machine.
  • 【Cutting Thickness】: this plasma cutter easy cut all metals especially stainless steel. Quality cutting thickness for steel is 10mm#65PSI(0.65Mpa) 220V 50Amps, Max cutting thickness 14mm#65PSI 220V 50Amps; At 110V 35Amps, the quality cutting thickness is 8mm#60PSI(0.6Mpa) 110V Max cutting thickness is 10mm#60PSI(0.6Mpa) 110V. The current for this plasma cutting machine 50Amps in 220V, 35Amps in 110V. For cut copper 2-3mm#60PSI(0.6Mps)220V 50Amps is suggested.
  • 【Quality accessories】: We only producing high quality machine and supplying quality accessories. 4 meters PT31 cutting torch coming with machine, earth clamp with 2 meters lead, 2 pcs torch electrodes, 2 pcs tip. 2 meters air hose, 1 set air regulator with air gauge. Machine come with 110V power plug, also with 1 pc wire adaptor from 110V to 220V.

Cuwiny Plasma Cutter torch, PT-31 Air Plasma Cutting Gun with M161.5 Brass Screw 2 pins Connectors, Duty Cycle 60%, work with ESAB/L-TEC PT-31 JG-40 WSD-LG40 CUT50 and most Plasma Cutting machine

$39.99  in stock
Amazon.com
as of April 22, 2022 5:31 am

Features

  • High Quality Plasma Cutting Torch PT31, Flex and Durable Neck.
  • HF Ignition, easy to start arc. Post Flow: 40 second. Recommended This torch can work with ESAB/ L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch.
  • 60% Duty Cycle, The electrode and tip easy replace.Torch Length: 4Meter(13.12Feet).
  • This torch can work with ESAB/ L-TEC PT-31, JG-40 and WSD-LG40 Cutting Torch,Included consumables comes with one set of consumables (1 electrode, 1 nozzle, 1 cup).
  • This Torch Working with CUT50D CUT-50 CUT40 LGK-40 CT312,CT312D CT416 CT416D CT518 CT518D Cutting machine.

Jack&Dave 100 Pcs Plasma Cutting Consumables (Standard) Fit Cut40 50 with Plasma Cutter Torch PT31 LG40

$25.80  in stock
Amazon.com
as of April 22, 2022 5:31 am

Features

  • 100PCS Plasma cutting consumables Common
  • Package Include:10 Pcs Cup 30 Pcs Electrodes 20 Pcs Ring 40 Pcs Tip(Common)
  • Fits Stahlwerk CT312, CUT50, ACDC TIG200 PLASMA, CT520, CT512P with PT-31 GUN
  • Fit PT31-GUN
  • For 40 50 Amps Cutting Machine

FIFA Soccer 12 - Nintendo Wii

$40.00  in stock
7 new from $35.36
27 used from $3.33
Free shipping
Amazon.com
as of April 22, 2022 5:31 am

Features

  • Hit The Pitch - Play a traditional 11 versus 11 football match, choosing from over 500 licensed teams from over 30 leagues, with authentic kits and stadiums.
  • Be A Manger - All-new manager mode enables you to take your favorite club to the top of the league tables - and keep them there!
  • Awards - Featuring over 100 all-new awards throughout every game mode. Net the Last Gasp Winner in injury time or score a goal from a Scorpion Kick and you are on your way to building the best FIFA City.
  • Hit The Streets - Decked out in cool street wear, compete in 5 versus 5 street matches in famous cities and indoor environments. Customize the rules of each match for a true test of skill.
  • FIFA City - See your personalized FIFA City grow as you complete and earn awards in every game mode. Earn buildings and infrastructure, better players, passionate fans, and grow your city into one of the world’s most desirable places to play. Unlock coveted players and build your own dream club of international superstars.

24PCS SG-55 AG-60 WSD-60 Plasma Cutter Cutting Torch Tip Nozzles Consumables Kit

$18.99  in stock
Amazon.com
as of April 22, 2022 5:31 am

Features

  • plasma cutting Pilot Arc torch head set, SG-55, AG-60,WSD-60P plasma torch spacer guide
  • Color:Sliver+light purple
  • Material:Metal+ceramics
  • 100% brand new and high quality

S7 Tig Welder, HF TIG/Stick/Arc TIG Welder,200 Amp 110 & 220V Dual Voltage TIG Welding Machine

$197.99  in stock
4 new from $196.99
Free shipping
Amazon.com
as of April 22, 2022 5:31 am

Features

  • ️【★TIG&ARC Strong Point】Inverter Frequency Up To 100KHZ, The Welding Speed Is Fast, The Welding Process Is The Best.This Is Optimized To Deliver A Flawless Weld, Making Spatter And Post-weld Cleanup Almost Non-existent.Rated Input Frequency 50/60Hz, Duty Cycle 85%,Improves The Performance Of The Welding Machine
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage protection, Under Voltage Protection, Over Current Protection, Over Load Protection

Conclusion

Above is a list of the Best Budget Plasma Cutter we want to send to you, if you feel good please support us, thanks and have a nice day

4.3/5 - (6 votes)

Comments

No comments yet. Why don’t you start the discussion?

    Leave a Reply

    Your email address will not be published.